1. Monitoring silicon wafer appearance
2. Testing resistivity of silicon wafers
3. Testing minority carrier lifetime

1. Minority carrier lifetime after etching
2. Thickness after etching
3. Etching surface
4. Testing the temperature and humidity of etching workshop and the pure water
5. The purification degree of etching workshop
6. Block resistance after diffusing monitoring points
7. Minority carrier lifetime after diffused
8. Craft panel surface after diffused
9. Temperature and humidity of diffusion workshop
10. Cleanliness of diffusion workshop
11. Surrounding resistance after etched
12. Etching width
13. Temperature and humidity of etching workshop
14. Cleanliness of etching workshop
15. Block resistance examination after removing phosphorus and silicon
16. Appearance examination after removing phosphorus and silicon

1. Solar panel appearance examination
2. Power examination of individual solar panel
3. Welding appearance examination of individual solar panel
4. Temperature control of electric soldering iron
5. Temperature and humidity control of the surroundings.
6. Cleanliness control of working environment
7. Welding appearance examination
8. Temperature control of electric soldering iron
9. Temperature and humidity control of the surroundings.
10. Cleanliness control of working environment
11. Examining auxiliary materials for lamination
12. Examining appearance without lamination
13. Temperature and humidity control of the surroundings
14. Cleanliness control of working environment
15. Examining electrical property after laminated
16. Examining the laminated appearance
17. Temperature and humidity control of the surroundings
18. Examining electrical property and appearance
19. Appearance examination after lamination

1. After the foundation construction is finished, the distance between flange plates, foundation level, and site formation should be all examined.
2. After the equipment has carried to the construction site, it is necessary to examine the packing list, and quality certificate. And workers should also examine whether the data of the test report is complete, or meet requirements. The amount of equipments to be examined and their test reports should also be examine. Finally check and accept those equipments and their appearances.
3. After the structural engineering is finished, workers should examine whether the welding points and welding seams could satisfy the requirements of the drawing design, whether the welding seams of lightning protection ground pole and supporter connection fit the requirements of the drawing design, and whether the connection between the lightning protection ground pole and the supporter is firm. Besides, workers should also examine whether the installation of supporters is helpful enough for the next step to go on smoothly.
4. Before installing solar modules, workers should examine whether the illuminated surface of the solar array is smooth. Whether the solar modules are damaged or not should also be examined.